Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS compatbility with Hardware ( ADSL/BGP)

Hello,

I need help, will appreciate it greatly if someone can assist.

Following is the output from my Router. I need to have an IOS which recognizes my ADSL WIC card plus i can configure BGP also. Problem is i can't seem to locate the IOS with my Memory/HARDWARE which can support ADSL plus BGP. Any help will be appreciated.

Commerce-Valley-CE#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 17-Mar-08 15:24 by dchih

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

Commerce-Valley-CE uptime is 8 minutes

System returned to ROM by power-on

System image file is "flash:c2600-ipbase-mz.123-26.bin"

cisco 2620XM (MPC860P) processor (revision 0x100) with 49152K/16384K bytes of memory.

Processor board ID JAD071305V5 (1789417009)

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 ATM network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

--------------------------------

Commerce-Valley-CE# sh diag

Slot 0:

C2621XM 1FE Mainboard Port adapter, 3 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 1.0

PCB Serial Number : JAD071305V5 (1789417009)

Part Number : 73-7753-02

RMA History : 00

RMA Number : 0-0-0-0

Board Revision : B0

Deviation Number : 0-0

Product (FRU) Number : C2620XM-1FE

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 6C 41 01 00 C1 18 4A 41 44 30 37 31

--------------------------------------------------------

WIC Slot 0:

FT1 BT8360

Hardware revision 1.3 Board revision C0

Serial number 27467070 Part number 800-03279-04

FRU Part Number WIC-1DSU-T1=

Test history 0x0 RMA number 00-00-00

Connector type Wan Module

EEPROM format version 2

EEPROM contents (hex):

0x20: 02 11 01 03 01 A3 1D 3E 50 0C CF 04 00 00 00 00

0x30: 60 00 00 00 01 12 15 01 FF FF FF FF FF FF FF FF

WIC Slot 1:

DSL SAR (ADSL)

Hardware Revision : 2.3

Part Number : 73-4771-09

Board Revision : C0

Deviation Number : 0-0

Fab Version : 05

PCB Serial Number : FOC08121WNG

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : PA-1C-P=

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30

1 REPLY
Hall of Fame Super Gold

Re: IOS compatbility with Hardware ( ADSL/BGP)

Any 12.4 IOS will do that, the issue is that you need customer-level access (support contract) to download, and expanded flash and ram to use it.

197
Views
0
Helpful
1
Replies