IOS Features

[bradlesliect]

Hi,

I have the latest ver of an IOS for 837:

c837-k9o3y6-mz.124-10a.bin

How do I find out what it supports?

[spremkumar]

Hi Brad

Hope this links helps u to find out the feature your ios code supports..

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

regds

[bradlesliect]

thank you ...but .... :)

what is the diff between IP/FW 3DES and IP/FW/PLUS 3DES

[mheusinger]

Hi,

Usually the IOS feature navigator can help you: www.cisco.com/go/fn

You will find a link Search by software and another link search by platform. Either way you should find your combination.

One word of caution out of personal experience, though: not every feature might be listed and the FN might just not be up to date. So my suggestion is to also have a look at the configuration guide and command reference or at "Cisco IOS Software Release 12.4 Features and Hardware Support"

http://www.cisco.com/en/US/products/ps6350/prod_bulletin09186a0080457b39.html

Hope this helps! Please rate all posts.

Regards, Martin

[bradlesliect]

thanks ...man cisco site not really that easy to nav.

"New ROMmon will be released for Cisco83x, Cisco828 and Cisco SOHO 90 Series platforms."

where would i find the above and why would you use it if your router is a production / live router?

[amit-singh]

Hi Friend,

837 comes by default with security image loaded on it. The router that you have is with Secuirty plus image on 837 router with IP/Firewall/IPSec 3DES.

Please see the link below for more explanation on the features that it supports :

http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet09186a008010e5c5.html

HTH,

-amit singh

[bradlesliect]

Thank you. Taking a look now. How do i find the latest ROMmon version for the 837? .... :)