06-20-2008 08:11 AM - edited 03-03-2019 10:26 PM
I have 3 of these cards and would like to use them in my 7301's or 7206's
the Software Advisor doesn't like this card, it never returns anything...
anyone any advice ?
06-20-2008 09:36 AM
According to
http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_bulletin09186a008007d45a.html
It should be fine as long as you have 12.1(5)T or later
HTH,
__
Edison.
06-20-2008 11:28 AM
Which 7200 are these? The card can be used only on VXR chassis.
06-20-2008 12:00 PM
i only have vxr chassis with npe 300 or 400 or npe g1 processors, the only recomeded ios ref is for 12.2 xy or similar that is no longer available,
i would ideally like to run these in the 7301, cco says they are supported....
06-20-2008 12:02 PM
i've tried the latest SP 12.4 that's no good (on the 7301)
06-20-2008 12:18 PM
CCO can be wrong on occasions. These cards had a limited production and some info can be wrong about it. Test it first in a 7200 chassis to verify it's working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: