Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IOS that supports WCCP on GSR

Hi gurus,

what is the ios version that supports wccp for my gsr's? I have the ff:

1. cisco 12406/PRP (MPC7457) processor (revision 0x00) with 3670016K bytes of memory.

2.

cisco 12416/PRP (MPC7457) processor (revision 0x00) with 3670016K bytes of memory.

tia.

jeff

2 REPLIES
Hall of Fame Super Silver

Re: IOS that supports WCCP on GSR

Hello Jeff,

when we consider a GSR for its distributed architecture it is important to know what linecards you have on the chassis.

Exactly as when you asked about PBR.

If you have engine2 linecards (3GE engine2) there is no chance to support WCCP.

We tested this with web caches some years ago.

with other engines it may be but I'm not sure.

in table 4-1 of the following GSR is not listed

http://www.cisco.com/en/US/products/sw/conntsw/ps547/products_configuration_guide_chapter09186a008007ffb6.html#20650

So I think you need a C7600 for supporting WCCP.

I tried also to use feature navigator

www.cisco.com/go/fn

then search by feature

search WCCP vers 2

but the list of platforms don't include 12000.

Hope to help

Giuseppe

New Member

Re: IOS that supports WCCP on GSR

Hi Giuseppe,

Thanks a lot for this information, im really limited on the design due to this not so updated equipment.

Many thanks.

jeff

135
Views
0
Helpful
2
Replies
CreatePlease to create content