Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgradation in Cisco 7609

Sir,

I want to grade my cisco 7609 router.

CENTRAL#sh ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-JK9O3SV-M), Version 12.2(17a)SX4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 21-Apr-04 23:46 by pwade
Image text-base: 0x40008FBC, data-base: 0x4223A000

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-JK9O3SV-M), Version 12.2(17a)SX4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

CENTRAL uptime is 1 year, 20 weeks, 1 day, 19 hours, 20 minutes
Time since TRICHYCENTRAL switched to active is 1 year, 20 weeks, 1 day, 19 hours, 19 minutes
System returned to ROM by bus error at PC 0x4165EAB4, address 0x4C at 10:21:11 GMT Sat Oct 18 2008 (SP by power-on)
System restarted at 17:05:28 GMT Sat Oct 18 2008
System image file is "sup-bootflash:s72033-jk9o3sv-mz.122-17a.SX4.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco CISCO7609 (R7000) processor (revision 1.1) with 458752K/65536K bytes of memory.
Processor board ID FOX0845006A
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
Channelized E1, Version 1.0.
5 FlexWAN controllers (56 E1)(3 Channelized E3).
2 Virtual Ethernet/IEEE 802.3  interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
66 Serial network interface(s)
3 Channelized E3 port(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.

Configuration register is 0x2102

How to check whether sufficient memory available?.

If i upgrade new IOS can support all the interfaces in my router.

Regards,

Senthil

8 REPLIES
Hall of Fame Super Silver

Re: IOS upgradation in Cisco 7609

Hello Senthil,

you should also provide the sh module

there are IOS images that support services modules like FWSM, ACE, CSM, WISM and WAN modules like flexwan and other that cannot.

A good recent train with support for service modules is 12.2(33)SXI2a

see this example:

sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  2    6  Firewall Module                        WS-SVC-FWM-1       SAD085008DY
  3    8  8 port 1000mb ethernet                 WS-X6408-GBIC      SAD03295602
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAD0851097J
  6   16  CEF720 16 port 10GE                    WS-X6716-10GE      SAL1328TULH
  7   16  SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX     SAL08311CYB
  9    1  Application Control Engine Module      ACE20-MOD-K9       SAD1112028E

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  2  0012.7ff6.4790 to 0012.7ff6.4797   3.0   7.2(1)       2.3(2)4      Ok
  3  00d0.d39b.7210 to 00d0.d39b.7217   2.3   4.2(0.24)VAI 12.2(33)SXI2 Ok
  5  0011.21a1.6768 to 0011.21a1.676b   4.1   8.1(3)       12.2(33)SXI2 Ok
  6  0024.c463.cd20 to 0024.c463.cd2f   1.0   12.2(18r)S1  12.2(33)SXI2 Ok
  7  0011.9380.62e0 to 0011.9380.62ef   2.6   6.3(1)       12.2(33)SXI2 Ok
  9  001b.2a4e.7b36 to 001b.2a4e.7b3d   2.1   8.7(0.22)ACE A2(1.5a)     Ok

or a 12.2(33)SRE to stay on the C7609 product line

you have 512 MB of RAM on your system, dir /all can tell you the flash size

>> cisco CISCO7609 (R7000) processor (revision 1.1) with 458752K/65536K bytes of memory.

you have only 64MB of memory for flash

>> 65536K bytes of Flash internal SIMM (Sector size 512K).

you probably need to put an external flash of bigger size, if possible, to load recent IOS images

dir /all
Directory of disk0:/

    1  -rw-    80679972  Jan 24 2008 20:53:12 +01:00  s72033-advipservicesk9_wan-mz.122-18.SXF11.bin
    2  -rw-   101534052   Oct 8 2009 12:21:58 +02:00  s72033-advipservicesk9_wan-mz.122-33.SXI2a.bin

Hope to help

Giuseppe

New Member

Re: IOS upgradation in Cisco 7609

Dear sir,

Sh Module output is

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1    0  2 port adapter FlexWAN                 WS-X6182-2PA       JAB090601T4

  2    0  2 port adapter FlexWAN                 WS-X6182-2PA       JAB09060223

  3    0  2 port adapter FlexWAN                 WS-X6182-2PA       JAB085202ZF

  5    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD08490ELZ

  6    2  Supervisor Engine 720 (Warm)           WS-SUP720-BASE     SAD09050DFM

  7    0  2 port adapter FlexWAN                 WS-X6182-2PA       JAB084703KK

  8   48  48-port 10/100 mb RJ45                 WS-X6148-RJ-45     SAL08424WDU

  9    0  2 port adapter FlexWAN                 WS-X6182-2PA       JAE0922DW04

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  1  0011.9304.05b0 to 0011.9304.05ef   1.6   12.2(17a)SX4 12.2(17a)SX4 Ok

  2  0011.9242.a9a0 to 0011.9242.a9df   1.6   12.2(17a)SX4 12.2(17a)SX4 Ok

  3  0012.43de.04c0 to 0012.43de.04ff   1.6   12.2(17a)SX4 12.2(17a)SX4 Ok

  5  000d.ed92.aa30 to 000d.ed92.aa33   3.2   8.1(3)       12.2(17a)SX4 Ok

  6 0011.21ba.c36c to 0011.21ba.c36f   3.2   8.1(3)       12.2(17a)SX4 Ok

  7  0012.00dc.63c0 to 0012.00dc.63ff   1.6   12.2(17a)SX4 12.2(17a)SX4 Ok

  8  0012.800f.2c38 to 0012.800f.2c67   3.1   5.4(2)       8.2(0.56)TET Ok

  9  0014.6955.1540 to 0014.6955.157f   1.6   12.2(17a)SX4 12.2(17a)SX4 Ok

dir /all

Directory of disk0:/

    1  -rw-    48404016   Mar 7 2006 06:48:42 +00:05  s72033-jk9o3sv-mz.122-18.SXD2.bin

127848448 bytes total (79441920 bytes free)

I have another router cisco 7609 with the details

Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRC4, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Tue 12-May-09 03:11 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

7609-RTR1-CDMA uptime is 10 weeks, 6 days, 14 hours, 41 minutes

Uptime for this control processor is 10 weeks, 6 days, 14 hours, 40 minutes

System returned to ROM by  power cycle at 13:33:22 PDT Wed Sep 23 2009 (SP by power on)

System restarted at 19:47:45 UTC Wed Dec 23 2009

System image file is "bootdisk:c7600s72033-advipservicesk9-mz.122-33.SRC4.bin"

Last reload type: Normal Reload.

Shall I download IOS and use that IOS in old cisco router disk instead of flash.Any problem will come.

Thanks and Regards,

Senthil

Hall of Fame Super Silver

Re: IOS upgradation in Cisco 7609

Hello Senthil,

with your hardware the SW advisor suggests the following image:

12.2(18)SXF16                                                                                                                                                           
s72033-advipservicesk9_wan-mz.12.2-18.SXF16

probably 12.2(33)SXH or 12.2(33)SXI don't support flexwan modules WS-X6182-2PA.

As far as I know the image can be placed on the external disk.

you willl need to configure the correct image name and path

boot system drivename:imagename

Hope to help

Giuseppe

New Member

Re: IOS upgradation in Cisco 7609

sir,

can i use Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRC1, RELEASE SOFTWARE (fc1)

This is available in another cisco 7609 router.Whether it will detect Flewan Module

Thanks and Regards,

Senthil

New Member

Re: IOS upgradation in Cisco 7609

sir,

can i use Cisco IOS  Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M),  Version 12.2(33)SRC1, RELEASE SOFTWARE (fc1)

This is available in  another cisco 7609 router.Whether it will detect Flewan Module.also whether this OS will support ip sla monitor command.

Thanks  and Regards,

Senthil

Hall of Fame Super Silver

Re: IOS upgradation in Cisco 7609

Hello Senthil,

I think you are probably tied to 12.2(18)SXF with flexwan module as I've seen in SW advisor tool

Hope to help

Giuseppe

New Member

Re: IOS upgradation in Cisco 7609

Sir,

i want to upgrade this router for using track based routing.Whether this will support ip sla monitor or rtr command.

Thanks and Regards,

Senthil

Hall of Fame Super Silver

Re: IOS upgradation in Cisco 7609

Hello Senthil,

I've checked on release notes because it looked like strange flexwan modules not supported in recent IOS images.

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/DRAFTS/7600_hwd_SRE.html#wp1036417

flexwan service modules are still supported on newer images starting form 12.2(33)SRA

You have probably done this test, the image in your other device should be fine for the upgrade and it should support all those flexwan that are installed.

IP SLA for HSRP, GLBP and VRRP  should be supported but you need IP services, or advanced IP services or advanced enterprise feature set

Edit:

>> c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M),  Version  12.2(33)SRC1, RELEASE SOFTWARE (fc1)

yes, this is fine for your needs

Hope to help

Giuseppe

3165
Views
5
Helpful
8
Replies
CreatePlease login to create content