12-14-2006 11:55 AM - edited 03-03-2019 03:02 PM
I am preparing 3750 switches for an IOS upgrade. The switch will be connected to a server running tftp server application (pc- IP address 192.168.10.1) directly to the ethernet port. I am configuring vlan1 on the switch with IP address 192.168.10.2. I am able to ping the switch from the server but not the server from the switch. Do I need to do anything else to establish connectivity?
Solved! Go to Solution.
12-14-2006 12:43 PM
Check the windows firewall settings on your PC and it may be blocking ICMP echo. I believe, on your PC you can selectively allow ICMP echo packets or disable firewall functionality just for the upgrade and enable it afterwards.
HTH
Sundar
12-14-2006 12:43 PM
Check the windows firewall settings on your PC and it may be blocking ICMP echo. I believe, on your PC you can selectively allow ICMP echo packets or disable firewall functionality just for the upgrade and enable it afterwards.
HTH
Sundar
12-14-2006 12:46 PM
Sundar, I found the problem just as you responded. I was the firewall setting on the pc. Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: