Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS upgrdation[urgent]

Hi All,

I am in the process of upgradaing IOS,

Total size of the flash :32 MB

Size of the current Flash:14 MB

Size of the new proposed flash :20 MB

I know i have to delte the exising flash while upgraaing the new IOS

caN any one tellme the procudeure to upgrade and probelms i may encounter during this change

If any any cisco doc is please suggest me the same

Thanks very much in advacne

Adhi

4 REPLIES
Gold

Re: IOS upgrdation[urgent]

Yes you are right you need delete current IOS in flash...

If you delete IOS and upgrade fails you still have device running old IOS until your restart the router

I suggest you to backup before you start

1) Current IOS

2) Current configuration

Check the procedure

http://www.netadmintools.com/art98.html

Last part of this document is workaround what you need to do if after reboot doesnt router come up

m.

Hope that helps rate if it does

Re: IOS upgrdation[urgent]

You can boot the new image via TFTP for testing before delete the current image.

boot system tftp imagename.bin x.x.x.x

make sure your RAM will meet the image req (www.cisco.com/go/fn), also use a secondary boot statement pointing to the current image on the Flash memory.

New Member

Re: IOS upgrdation[urgent]

Hi

Thanjs for update

Could you please le me know in brief means in sterps

regd

Adhu

New Member

Re: IOS upgrdation[urgent]

Hai Adhi,

you need to delete the ios.try to copy the current ios from flash to tftp.What is the series of router??.check the connectivity between router and TFTP server by pinging...

1)copy the file to TFTP root folder....

2)go to router enable mode Router#delete flash:

3)Now copy ios from TFTP to flash...(make sure router should not get rebooted this time....(if this happend then you will be forced to transfer the ios via console cable ..which will take long time)

after transfering the ios check the config-register value is 0x2102

reset

all the best

ujil

130
Views
0
Helpful
4
Replies