That's exactly what I did before I downloaded this image. It said it had all those features... so I just wanted to make sure that they were indeed there by typing a command...
In the past, I have ran into problems where I needed to enable or make use of a feature, for example the Firewall set on the routers, and I called cisco and they never said "upgrade to a newer IOS", they said I needed an activation key or something like that
I'm not aware of any features out there that need an activation key. You pay for features by buying the appropriate feature set which you have done already. So the bottom line is that if you have got a feature set that supports a particular feature, you should be able to configure it.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...