Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IOS-XE missing object-group network command?

I'm in the process of installing four Cisco 4451-X routers and see that the object-group network command is missing?! There is an object-group security but no network.

Will this be coming back or am I missing something?

Everyone's tags (4)
10 REPLIES
New Member

IOS-XE missing object-group network command?

Did you get any resolution to this problem as I have the same issue

New Member

IOS-XE missing object-group network command?

Nothing at all. No one seems to have an answer. I'm going to call my Cisco SE later today.

New Member

IOS-XE missing object-group network command?

Yep I am going to raise with our distributor

New Member

Hello, I am having the same

Hello, 

I am having the same problem with IOS asr1001-universalk9.03.09.01.S.153-2.S1.bin, but I could figure out on another ASR1001 that the command is available in this very old IOS-Version: asr1001-universalk9.03.06.00.S.152-2.S.bin

 

So anyway - can You confirm that the "object-group network" command ist available on Version 03.12.01.S ? 

 

Thanks, 

Stefan

 

Cisco Employee

Stefan,This cmd is again

Stefan,

This cmd is again availabe from ;

Release 4.3.1

object-group network

To configure a network object group, and to enter the network object group configuration mode, use theobject-group network command in the global configuration mode. To de-configure the network object group, use the no form of this command.

object-group network { ipv4 | ipv6 object-group-name

no object-group network { ipv4 | ipv6 object-group-name

Syntax Description

ipv4

Configures the operation state of an IPV4 network object group.

ipv6

Configures the operation state of an IPV6 network object group.

object-group-name

Name of the object-group.

Command Default

None

Command Modes

Global configuration

Command History

ReleaseModification
Release 4.3.1

This command was introduced.

 

HTH

New Member

How to Solve a Problem?

How to Solve a Problem? 

Please help. 

 

New Member

I'm late to update this post

I'm late to update this post but it looks like the command is back in Cisco IOS XE Software, Version 03.12.01.S - Standard Support Release.

object-group network SRS_Internal
 host 10.138.244.11
 host 10.138.244.12

 

New Member

Thank's  for your reply

Thank's  for your reply campbech1 !

 

But my version: 

Cisco IOS XE Software, Version 03.10.02.S - Extended Support Release

Cisco IOS Software, ISR4400 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)

What's wrong??? 

New Member

I don't believe it was

I don't believe it was supported until version 3.12 and you're on 3.10 currently. You'll need to complete a software upgrade.

New Member

Believe me. <<You'll need to

Believe me. 

<<You'll need to complete a software upgrade.>>

Ok, I will try.  

926
Views
0
Helpful
10
Replies
CreatePlease to create content