Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IOS-XRv 5.2.0: additional paths is not working

Hello,

 

I have two peers configured as follows (I'm only including the config of the RR client, but the RR config is analogous):

 

RP/0/0/CPU0:PE4#show run router bgp 65000
router bgp 65000
 address-family ipv4 unicast
  additional-paths receive
  additional-paths send
 !
 neighbor-group RR
  remote-as 65000
  capability additional-paths receive
  capability additional-paths send
  update-source Loopback0
  address-family ipv4 unicast
   route-policy PL-IBGP-RR-OUT out
  !
 !
 neighbor 172.16.0.201
  use neighbor-group RR
 !
 neighbor 172.16.0.202
  use neighbor-group RR
 !

=====

 

However, the capability is not negotiated:

 

RP/0/0/CPU0:PE4#show bgp neighbor 172.16.0.202 | include Additional
  Additional-paths operation: None

Any clues?

110
Views
0
Helpful
0
Replies
CreatePlease to create content