Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IP Accounting

Hi,

We have a WS-C3750E-24TD with a 12.2(44)SE2 image.

I am trying to configure ip accounting on one interface to see the specific ip addresses generating the amount of traffic.

Although the command is supported on the interface but no output is seen

Can anyone please help me in viewing the ip addresses generating packets.

Regards,

Amol.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: IP Accounting

i am not sure this is supported. pls take a look at this link.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_44_se/configuration/guide/swuncli.html#wp1009453

i will suggest you configure a SPAN (mirroring) interface and take the output to analyse it outside of the switch. or use open source solutions like NTOP to find what your looking for. search for NTOP at freshmeat.net

1 REPLY
New Member

Re: IP Accounting

i am not sure this is supported. pls take a look at this link.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_44_se/configuration/guide/swuncli.html#wp1009453

i will suggest you configure a SPAN (mirroring) interface and take the output to analyse it outside of the switch. or use open source solutions like NTOP to find what your looking for. search for NTOP at freshmeat.net

102
Views
0
Helpful
1
Replies