We are facing problem with load sharing between two intranet links connected to a Cisco Layer 3 switch. I am thinking of using "ip cef load-sharing algorithm universal ID" command to fix this problem. As per my knowledge Universal logic is the feault one but i want to play around the fixed ID and see if this can be address.
I do not have much idea about selecting which ID to use and i am seeking for more information on this.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...