Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ip nat outside source static -step by step-

I need to include another local ip address / Global Ip Address, and i dont have much experience doing, i read de manual an said,

ip nat outside source static 200.30.143.181 192.168.0.3

i want to do well, bcause is in production de router cisco 800.

Let me know how to do, step by step, if i have to turn off eth? or do something before and after to run with this issue.

or it can be do by Cisco Router Web setup?

Thanks, for help,

PS.

Cisco Router 800.

allready configured with 2 local ip address/global ip address-

1 REPLY
Silver

Re: Ip nat outside source static -step by step-

To translate the source address of the outside hosts in the traffic flowing from the outside to the inside network, issue the ip nat outside source command.Refer URL for more informartion http://www.cisco.com/warp/public/556/nat-faq.html.

775
Views
0
Helpful
1
Replies