02-08-2009 08:06 PM - edited 03-04-2019 03:28 AM
Dear All
Just got a quick question, and hoping someone can help with a quick answer or a suggestion on how it can be done.
Basically we have one router with one WAN interface with 5 VLANS. I enabled ip nbar on the WAN and can see the break down of each type of packet and protocol.
Now the question is, will it be possible to break it down on different VLANS?
Reason for this is because each VLAN is assigned to a different customer and each customer wants a break up of their usage.
Any replies or suggestions will be much appreciated.
02-12-2009 07:51 PM
Anyone?
02-12-2009 09:33 PM
Hello John,
are you interested on filtering the NBAR show commands on a per Vlan basis ?
I ask because for me it's not clear what you mean with
breaking down on a vlan basis
Hope to help
Giuseppe
02-12-2009 09:38 PM
Hi Giuseppe
Thanks for the reply, basically we have for example 5 customers on 5 different vlans sharing on link.
I enabled NBAR on the WAN interface and i can see what protocol and traffic is going through for example like HTTP, P2P etc.
What i want to do is get NBAR to work on each individual VLAN.
So i can provide each of the 5 customers a report showing what protocols and traffic they are using.
I hope that makes it more clear :)
02-19-2009 02:23 PM
Anyone? :)
Surely someone must know. Where are all the gurus.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: