could someone tell me something about the command?
MBO-RT-02#sh ip ospf de
OSPF Router with ID (192.168.167.1) (Process ID 1)
Intra-area Route List * 192.168.161.0/24, Intra, cost 1, area 0, Connected via 192.168.161.6, FastEthernet0/0.1
MBO-RT-02# MBO-RT-02# MBO-RT-02#sh ip ospf ? <1-65535> Process ID number border-routers Border and Boundary Router Information database Database summary flood-list Link state flood list interface Interface information max-metric Max-metric origination information mpls MPLS related information neighbor Neighbor list request-list Link state request list retransmission-list Link state retransmission list rib Routing Information Base (RIB) sham-links Sham link information statistics Various OSPF Statistics summary-address Summary-address redistribution Information timers OSPF timers information traffic Traffic related statistics virtual-links Virtual link information | Output modifiers <cr>
This command shows you the lsas which have been deleted from consideration. as i don't have ospf running, i can't ascertain whether this is lsas which were taken out of consideration by the SPF algorithm or by other means.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...