Does this means that it has 2 routes to the destination
And also i executed "sh ip route 10.71.252.18" the result is
internalrouter#sh ip route 10.71.252.18 Routing entry for 10.71.252.16/30 Known via "ospf 1", distance 110, metric 30, type intra area Last update from 10.71.0.34 on Tunnel10, 00:19:06 ago Routing Descriptor Blocks: * 10.71.0.34, from 10.64.147.1, 00:19:06 ago, via Tunnel10 Route metric is 30, traffic share count is 1 10.71.0.30, from 10.64.147.1, 00:19:06 ago, via Tunnel9 Route metric is 30, traffic share count is 1
what is the symbol * represents. Does it means there are two routes available and the route with the * is the prefered one
The result clearly indicate that there is two paths to the destination.
Traceroute toggles each probe between the different equal cost paths that is avalable.
*—Indicates the last path used when a packet was forwarded. It pertains only to the nonfast-switched packets. However, it does not indicate which path will be used next when forwarding a nonfast-switched packet, except when the paths are equal cost.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...