Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IP SLA and Tracking for alerting




I configured IP SLAs for sites that connect to the Internet via a 2911 router



ip sla 199
 icmp-echo source-interface GigabitEthernet0/2
ip sla schedule 199 life forever start-time now

ip sla logging traps

track 199 ip sla 199
 delay down 120 up 120


Works great - sends a syslog message to the Solarwinds box and message sets off an email alert.


We have a couple of smaller sites that connect to the Internet via a 5510. I'm trying to accomplish the same thing but, it doesn't seem to have the options to set a "delay down and delay up"

Below seems to be my only option:

"track 199 rtr 199 reachability"


Will this tracking-config log the ping fail and if so, is there a way to delay the logging for 120 secs - for Up and Down events?


Thanks, Pat


Everyone's tags (1)

Hello Pat,Have you tried

Hello Pat,

Have you tried entering the command "track 199 rtr 199 reachability"

The prompt should look like this after:


Here you should be able to enter the command "delay down 120 up 120" to my recollection.

Please rate useful posts & remember to mark any solved questions as answered. Thank you.
New Member

I don't think so - I believe

I don't think so - I believe I stayed in config mode after track 199 rtr 199 reachabilty. I'll try again later though.