Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IP SLA config not saved

Running 12.4

I have some sla monitors configured one tracks the fe interface the other a dialer.

The dialer config gets removed after a reload

This is the config before reload

ip sla monitor 1

type echo protocol ipIcmpEcho 212.159.13.49 source-interface Dialer0

timeout 1000

threshold 40

frequency 3

ip sla monitor schedule 1 life forever start-time now

ip sla monitor 2

type echo protocol ipIcmpEcho 172.16.108.1 source-interface FastEthernet0/1

timeout 1000

threshold 40

frequency 3

ip sla monitor schedule 2 life forever start-time now

The sla 1 config gets rejected with a ^ pointing at the dialer interface.

Is this because it is not up when loading the config?

How can I get around it? I don't want to redo the config every time it reloads?

Thanks

1 REPLY
Silver

Re: IP SLA config not saved

First there is a bug you should look up as it looks like you are running into this issue:

go to Cisco.com, login, search for

CSCsc24145

That bug shows to have been fixed in 12.4(4)t1

If you upgrade be sure and back your router up first as always.

116
Views
0
Helpful
1
Replies
CreatePlease to create content