I want to make ipsla check server states to run EEM script then server will icmp timeout 3 times.
i writed the following configuration(CAT 6500 IOS 12.2).
ip sla 20 icmp-echo 172.31.3.206 source-ip 172.26.1.60 timeout 100 frequency 2 ip sla schedule 20 life 10 start-time pending ip sla 30 icmp-echo 172.31.3.206 source-ip 172.26.1.60 timeout 100 frequency 2 ip sla schedule 30 life forever start-time now ip sla reaction-configuration 30 react timeout threshold-type consecutive 3 action-type trapandtrigger ip sla reaction-trigger 30 20
track 20 ip sla 20 reachability
track 30 ip sla 30 reachability
but i found when ip sla 20 configured the ip sla status is unkonwn
SW#sh track 20 Track 20 IP SLA 20 reachability Reachability is Down 1 change, last change 00:00:17 Latest operation return code: Unknown Tracked by: EEM applet server-down
when server down,sla status will change to timeout,and eem will worked only once.
SW#sh track 20 Track 20 IP SLA 20 reachability Reachability is Down 1 change, last change 00:00:52 Latest operation return code: Timeout Tracked by: EEM applet server-down
When next time server up or down , the ip sla state will never changed, and the EEM never triggered.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...