I'm not sure if I have entered this questions into the correct disscusion group
I have created an IP SLA using Jitter-Path for an MPLS link, I have also created a reaction-configuration entry with a threshold of 1 5 for the round trip time(rtt). I have scheduled the IP SLA to run continuously. When I do the 'Show IP SLA 1 Statistics' the rtt does rise above 5ms at times however I never recieve an event in the syslog, actually that's a lie I see one random threshold entry and then nothing, once the IP SLA has reached do I need to schedule a reset or something?. That brings me to my second question, I would like to match the threshold pattern in the syslog and send out an email with the 'Show IP SLA 1 Statistics' results in the body of the email. Any advice would be greatly appreciated.
ok, I eventually worked out what I was doing wrong, the thresholds were incorrectly configured and I didn't understand fully how they worked. I now have another query - I have configured a event manager command to run a cli action and email the results based on a syslog pattern. When I use the follwoing command it works:
event syslog pattern "%RTT-3-IPSLATHRESHOLD"
However I'm going to be running multiple SLAs and I want to send an email out for each one. When I try the following command it fails to match the syslog pattern and the emails doesn't get sent.
event syslog pattern "%RTT-3-IPSLATHRESHOLD: IP SLAs(1): Threshold exceeded for rtt"
May 4 12:28:28.155: %RTT-3-IPSLATHRESHOLD: IP SLAs(1): Threshold exceeded for rtt May 4 12:28:28.163: fh_fd_syslog_event_match: num_matches = 0 May 4 12:28:28.163: fh_fd_data_syslog: num_matches = 0
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...