cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
298
Views
0
Helpful
1
Replies

ip sla snmp trap - not working

kst.amand
Level 1
Level 1

Router setup with following config. is not generating snmp trap;

Router - 2611XM

IOS - 12.3(12b)

Config Start ----

rtr 1

type echo protocol ipIcmpEcho 1.1.1.1 source-ipaddr 2.2.2.2

rtr reaction-configuration 1 timeout-enable threshold-type immediate action-type

trapOnly

rtr schedule 1 life forever start-time now

Config end ---

SNMP configuration is setup properly and working for other trap events.

SHOW RTR COLLECTION-STATISTICS show the the Timeout counter is increasing, but no SNMP trap is being triggered.

Any help or ideas?

1 Reply 1

kst.amand
Level 1
Level 1

I believe I have found my own answer - IP SLA SNMP trap support requires IOS 12.3(24).

Review Cisco Networking products for a $25 gift card