I amfacing the issue of track down in point to point 10 MB link, earlier it was 20 MB after downgrade the link, mentioned issue has occurred(refer error logs attached).We have tested following point with service provider as below.
End to End testing.
Got Router Port changed
Got the MUX port changed
Lcas/link integrity enabled: In this feature, whenever there is a problem in link, interface should also go down. – There was no interface down alert observed at customer end device.
Performance Management (PM) feature enabled: This will give the logs if any issue in the link. - There were no issues observed in logs.
would there be any impact on IP SLA tracking when we change the bandwidth of the link.
Please go through the attached sh tech and show log output.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...