I faced an issue in multilink between 7604 and 3825. Everytihing was working fine and all of a sudden i was not able to ping the other end of multilink. When I checked via console to 3825 end, it shows multilink IPCP was in REQSent state and LCP was open.
If LCP is open then there could not be any issues of authentication issues and link level issues.
We tried the folowing things:
a. shut and no shut multilink interfaces
b. shut and no shut all the individual E1 interfaces.
Unfortunately we were not able to collect any debug during that issue. The issue was solved by chaning the multilink interface to a new one.
Would like to know what causes IPCP to be stuck in REQSent. 3825 is sending IPCP packets to 7604 but 7604 is not sending any replies back?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...