We are running HUB & SPOKE Method. HUB is the PEER Router and Spoke are Branch Offices.
Note: 2" PEER Router at HO
The IPSec is established between the HUB & SPOKE Routers. Normally the scenario is: For a Spoke Location when it formed a IPSec session with one HUB Router, when i execute "sh ip route <spoke_LAN_segment>" at PEER Router the results will be know via "STATIC" with which the Crypto Peer has established and in other PEER Router the result will be know via RIP.
Now, in-recent days, we are receving complaints from many SPOKE Locations, unable to open the Application from 2/5" PC's out of 10" PC's for eg.
During this situation, when i execute the "sh ip route <Spoke_LAN_Seg>" the results is known via "STATIC" at both the PEER Router.
In a worst case, we swap the PEER Router relationship and clear the Crypto / SA / Sesssion.
Can someone help / clarify on the same. Thanks in Advance for all your HELP.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...