Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ipv6 on 2610xm

hi,

is it possible to route ipv6 on this plateform with ios c2600-i-mz-123-17a and how?

flash 16mo

ram 32mo

thanx

2 REPLIES
Cisco Employee

Re: ipv6 on 2610xm

Hi,

according to the Feature navigator (www.cisco.com/go/fn) the 2610XM supports IPv6, yet not with the feature set of your IOS image.

The minimum requirements for a feature set (IP PLUS or better) supporting IPv6 are 64M RAM and 16M flash f.e. with c2600-is-mz.122-11.T11.bin

With the latest versions (12.4) you will need 128M RAM and 32M flash.

So you would need to upgrade your memory at least.

As to how the configuration should look like, please have a look at the IPv6 configuration guide f.e. at

http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html

Regards, Martin

New Member

Re: ipv6 on 2610xm

thankx a lot

498
Views
0
Helpful
2
Replies
CreatePlease login to create content