I hope someone can please help here. Have Cisco 3845 connecting remote sites using PPP serial connections, routing IPX and IP. Some far ends are Cabletron SSRs, some Cisco 17xx. IP works great. All IPX servers and routes show on all the devices. But cannot browse or rconsole to the Netware 4.x boxes using IPX connected to the SSRs. No problem with the ones connected with the Ciscos. Servers in the core work great.
This has to be something with the SSRs but I have no idea. Anyone ever done this. The jerk is in love with IPX and can't be convinced to part with it. Any help is appreciated. Can provide configs or whatever - need this to work. TIA.
If IP works then nothing is wrong with the SSRs.So the problem is specific to IPX troubleshooting.Try pinging the Netware 4.x boxes and see if it works fine.If the ping works fine there might be some access list issues for http and console services.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...