Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IPX Routing

Hi

I have a 3550 switch which is connected to Novel server.

I have enabled brigding for all the L3 vlan on the switch and have connected the laptop directly to the 3550 switch

but i am not able to access the server.

Am i doing ant thing wrong ant thing extra need to be configured.

L3-48-Port(config)#bridge 1 protocol vlan-bridge

L3-48-Port(config)#int vlan 10

L3-48-Port(config-if)#bridge-group 10

L3-48-Port#show bridge group

Br Group Mac Address State Type Ports

-------- ----------- ----- ---- -----

1 0000.7481.7902 Forward DYNAMIC Vl5 Gi0/2

1 0000.7487.e7c7 Forward DYNAMIC Vl5 Gi0/2

1 0003.471b.d193 Forward DYNAMIC Vl5 Fa0/37

1 000d.614f.29cd Forward DYNAMIC Vl5 Gi0/2

1 001a.4bf2.602f Forward DYNAMIC Vl4 Gi0/2

1 0040.af82.1d76 Forward DYNAMIC Vl5 Gi0/2

1 0080.914c.3e2e Forward DYNAMIC Vl5 Gi0/2

1 0080.914d.73de Forward DYNAMIC Vl5 Gi0/2

Chao

Vishwa

3 REPLIES
Hall of Fame Super Silver

Re: IPX Routing

Hello Chao,

if the server is connected to a port associated to another Vlan

you need to add

int vlan x

bridge-group 10

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_46_se/configuration/guide/swfallbk.html#wp1020563

if all ports are in vlan 10 it should work (simple L2 LAN switching)even without configuring the inter-vlan bridge.

there is no chapter about ipx so fallback bridging is the right tool

Hope to help

Giuseppe

Community Member

Re: IPX Routing

Hi Giuseppe,

Thanks for the reply.

I should be able to access the server from all the vlan so the brigde group is applied to all the SVI interface and all are in same bride group.

As i have said i am not able to access the server when i connect the laptop to the switch in the same vlan.

Chao

Vishwa

Hall of Fame Super Silver

Re: IPX Routing

Hello Chao,

on the same switch same vlan you should be able to reach the server using the IPX suite.

Hope to help

Giuseppe

107
Views
2
Helpful
3
Replies
CreatePlease to create content