11-07-2010 02:20 PM - edited 03-04-2019 10:23 AM
My 4948 powers up, but the fans do not run at full speed. The status led flashing green. No other leds are orange or red. Nothing prints to the console. The switch port leds jump around as if it were telling a hardware tech where it got stuck. Led sequence is:
power up:
Ports 5,7, 12,13 21,23, 31, 39, 44, 45 light up. There is pattern here, so this looks normal. Status light blinks.
Then these leds sequence as follows
2->5->6. Led 6 says on and status light blinks. No port initialization takes place (ports 1-48 do not flash on and off).
is my $7k switch bricked?
11-07-2010 04:12 PM
Have you tried to console into the appliance and see what it's doing?
11-07-2010 10:15 PM
Yes. As previously described, nothing prints to the console.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide