03-17-2010 06:45 PM - edited 03-04-2019 07:50 AM
I have turn on AAA to enable radius authentication. However, I failed to login using the generated password by radius server, which end up I can't log into the router at all. To access this router again, I disconnected the router from LAN and tried using password-recovery measure but still fail. During password-recovery process, I have pressed ctrl+break couple of time but still fail to enter the romon mode.I've been doing this process more than 20 times but seems no use at all. Fyi, I m using router 2811. Really appreciate your advice on how to recover the password again.
Solved! Go to Solution.
03-17-2010 06:57 PM
1. Power off the 2811 router.
2. Pop the CF.
3. Turn on the router and wait until it boots into ROMmon.
4. Insert the CF but DO NOT BOOT yet.
5. Perform password recovery and boot the router.
03-17-2010 06:57 PM
1. Power off the 2811 router.
2. Pop the CF.
3. Turn on the router and wait until it boots into ROMmon.
4. Insert the CF but DO NOT BOOT yet.
5. Perform password recovery and boot the router.
03-17-2010 07:22 PM
THANK YOU!
03-17-2010 07:49 PM
Thank you for the ratings and glad to be of some assistance.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: