Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Is the NM-8CE1T1-PRI module supported on the Cisco2951 router?

Hi,

Is this module supported in the CISCO2900 routers?

I have come across two documents that seem to contradict each other:

In this one says:

Cisco 8-Port Channelized T1/E1 and ISDN PRI High-Speed WAN Network Module

Part number: NM-8CE1T1-PRI

Provides channelized T1 or E1 connections or ISDN PRI connection

Supported on Cisco 3800, Cisco 2900, and Cisco 3900 series routers

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_11xw/fmt1e1ic_voice.html

But in this one says:

Table 3. Number of Cisco Channelized T1/E1 and ISDN PRI Modules per Platform

Type of Module

Cisco 1841 and 2801

Cisco 2811, 2821, and 2851

Cisco 1941 and 2901

Cisco 2911, 2921, 2951

Cisco 3825, 3845

Cisco 3925, 3945

Cisco 3925E, 3945E

HWIC-1CE1T1-PRI

N/A

4

N/A

4

4

4

3

HWIC-2CE1T1-PRI

N/A

4

N/A

4

4

4

3

NM-8CE1T1-PRI

N/A

N/A

N/A

N/A

1

11

1

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet0900aecd80710c88_ps5949_Products_Data_Sheet.html

Which one is the right one?

Any help is much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Is the NM-8CE1T1-PRI module supported on the Cisco2951 router?

Hi,

You need to go with your 1st URL.

Also look at this one

http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf

Supported NM-8CE1T1-PRI only 39xx series

Your 2nd URL is a mistake by Cisco.

HTH

Alex

Regards, Alex. Please rate useful posts.
2 REPLIES
Green

Is the NM-8CE1T1-PRI module supported on the Cisco2951 router?

Hi,

You need to go with your 1st URL.

Also look at this one

http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf

Supported NM-8CE1T1-PRI only 39xx series

Your 2nd URL is a mistake by Cisco.

HTH

Alex

Regards, Alex. Please rate useful posts.
New Member

Is the NM-8CE1T1-PRI module supported on the Cisco2951 router?

You mean that the first URL is mistaken...

414
Views
0
Helpful
2
Replies
CreatePlease to create content