01-16-2009 05:29 AM - edited 03-04-2019 12:52 AM
following is a copy of sh redunancy of m 4510R, I just reset the config register to 0x102, is this setting correct for it to comeback up at reboot? (0x102) it is the default at bootup isnt it?...
BOOT =bootflash:cat4000-i9s-mz.122-25.ewa4.bin,1;
BOOTLDR = bootflash:cat4000-i9s-mz.122-25.ewa4.bin
Configuration register = 0x2101 (will be 0x102 at next reload)
thanks
rdavis
Solved! Go to Solution.
01-16-2009 05:32 AM
hello Rob,
yes the config-register command changes the value but not on the fly but at next reload you have changed to 0x102 as desired.
This is normal for config-register in all platforms. (change takes effect at next reload)
Hope to help
Giuseppe
01-16-2009 05:32 AM
hello Rob,
yes the config-register command changes the value but not on the fly but at next reload you have changed to 0x102 as desired.
This is normal for config-register in all platforms. (change takes effect at next reload)
Hope to help
Giuseppe
01-16-2009 11:40 AM
Thank You
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: