Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

isdn and aaa/ppp authentication

I am having difficulties understanding the following config as I don't have the ISDN equipment to test on :( I apprecate it if someone can explain it to me.

What interested me is the ppp and aaa authentication, are they correct? I created 2 groups (one tacacs+ server group name SANJOSE and a radius server group name ISDN. Can two groups have the same IP address?

All I want is allowing the users in group SANJOSE to access vty, aux, console and ISDN routers can authenticate only when the primary link failed.

Regards,

b

enable password cisco

!

aaa new-model

!

aaa group server tacacs+ SANJOSE

server 10.1.1.1

!

aaa group server radius+ ISDN

server 10.1.1.1

!

aaa authentication login default group SANJOSE tacacs+ enable

aaa authentication ppp ISDN-remote group ISDN

aaa authorization login default SANJOSE group tacacs+ enable

aaa authorization network ISDN-remote group radius

!

interface Dialer1

Description link to Cali

bandwidth 64

ip address 192.168.1.1 255.255.255.0

encapsulation ppp

dialer pool 1

dialer remotename site1

dialer-group 1

ppp authentication chap ISDN-remote

!

tacacs-server host 10.1.1.1 key cisco

1 REPLY
Silver

Re: isdn and aaa/ppp authentication

Go through this Configuration Examples and TechNotes documetns . It contains lots of examples for PPPOE and PPPOA , so it will clear your doubts.

http://www.cisco.com/en/US/tech/tk175/tk819/tech_configuration_examples_list.html

119
Views
0
Helpful
1
Replies
CreatePlease to create content