I have a problem with ISDN link connectivity as whenever we are goning to dial DataCenter dialer string from branch sometimes it showing deactivated, and sometimes active(Layer 1), multiple_frame_established(layer2) but in layer 3 (0 active calls). and sometimes it also dial to DC dialer string for 22 seconds or 120 seconds.we try this somany times with lease line(primary link) in on situation and also in off situation.
Whenever we dial from DC side to branch dialer string it continue for 120 seconds with lease line in on situation and also in off situation.
Can u help me on this and suggest me any sample configuration.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...