Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

isdn error

i can't get isdn connectivity in 1841 , but same isdn connection working 2600 series

3 REPLIES
Silver

Re: isdn error

Hi Narayanna ,

Please paste the config of both the routers ?

means working condition and not working condition.

Thanks :)

Satish

Hall of Fame Super Silver

Re: isdn error

lakshmee

In addition to the config of both routers it may be helpful if you would post the output of show isdn status on both routers.

HTH

Rick

New Member

Re: isdn error

Bajaj-TVL#sh isdn status

Global ISDN Switchtype = basic-net3

ISDN BRI0/0/0 interface

dsl 0, interface ISDN Switchtype = basic-net3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

2 Active Layer 3 Call(s)

CCB:callid=802D, sapi=0, ces=1, B-chan=1, calltype=DATA, hdlctype=HDLC-TRUNK

CCB:callid=802E, sapi=0, ces=1, B-chan=2, calltype=DATA, hdlctype=HDLC-TRUNK

Active dsl 0 CCBs = 2

The Free Channel Mask: 0x80000000

at this time the isdn layer is active in 1841 but it not active always sometimes it shows "layer1 is deactivated".But in 2600 series router it is active always

111
Views
0
Helpful
3
Replies