The idle timeout will take down the line when it has been idle for that period of time. When the dialer list says ip permit, then any IP packet going over the ISDN link will reset the idle timer. How much traffic is going over this link and what is the possibility that this is enough traffic that the link is never idle for that period of time?
Is it wise to have a default static route destined for the dialer interface. All default traffic will try the dialer interface. That could be alot of unnecessary traffic. Use a floating static route
ip route 0.0.0.0 0.0.0.0 dialer 1 2
The admin distance was changed to 2 in this statement. That means that any traffic destined for default will not take dialer 1 until the primary choice of traffic for default is down. Or you can remove the default static route all together and place a more specific route in its place, one that will not trigger the dialer.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...