Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ISDN Issue - User & Peer Address Missing

Hello Experts,

My CE Side ISDN Config:

=======================

Router1#sh run int BRI 0

Building configuration...

Current configuration : 335 bytes

!

interface BRI0

description ***ISDN-CE***

bandwidth 128

ip unnumbered Loopback0

encapsulation ppp

dialer idle-timeout 300

dialer string xxxxxxxx

isdn switch-type basic-net3

ppp authentication pap

ppp chap refuse

ppp pap sent-username ishdfckota1@corp.xyz.com password 7 12090404011C03162E

ppp multilink

end

My PE Side:

===========

Router#sh run int BRI 0/0

Building configuration...

Current configuration : 306 bytes

!

interface BRI0/0

description ISDN - PE Side

ip unnumbered Loopback0

encapsulation ppp

no ip route-cache cef

dialer idle-timeout 300

dialer-group 1

isdn switch-type basic-net3

isdn point-to-point-setup

no fair-queue

no cdp enable

ppp authentication pap

ppp chap refuse

ppp multilink

end

ISDN Active Status:

=====================

mum_kot_spct#sh isdn active

--------------------------------------------------------------------------------

ISDN ACTIVE CALLS

--------------------------------------------------------------------------------

Call Calling Called Remote Seconds Seconds Seconds Charges

Type Number Number Name Used Left Idle Units/Currency

--------------------------------------------------------------------------------

Out ---N/A--- 2333713 +C2621-ABAR 29 270 29 0

Out ---N/A--- 2333713 +C2621-ABAR 29 270 29 0

--------------------------------------------------------------------------------

ISDN User Status:

==================

mum_kot_spct#sh users

Line User Host(s) Idle Location

* 6 vty 0 sify idle 00:00:00 210.210.115.249

7 vty 1 sify idle 00:01:14 210.210.114.38

Interface User Mode Idle Peer Address

BR0:1 Sync PPP 00:00:33

BR0:2 Sync PPP 00:00:33

1 REPLY

Re: ISDN Issue - User & Peer Address Missing

Dear All,

Sorry for the Inconvenience, please ignore this POST.

Regards, Guru Prasad R

108
Views
0
Helpful
1
Replies