Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ISDN PRI

Hi,

Did any one face the above error when configuring the PRI.

AEDICR08(config-controller)#pri-group timeslots 1-31

% Not enough DSP resources available to configure pri-group on controller E1 0/0

/0

% The remaining dsp resources are enough for 0 time slots.

% For current codec complexity, 2 extra dsp(s) are required to create this voice

port.

Also i am not able to configure the card type. My router type is 2800.

Eldo

1 REPLY
Hall of Fame Super Gold

Re: ISDN PRI

The vwic card that you're using is meant for voice mainly and need DSP resource when configuring PRI. Are you configuring the router for voice applications ?

Card type is needed only when you have vwic2, you have vwic.

126
Views
0
Helpful
1
Replies
CreatePlease to create content