11-28-2007 05:27 PM - edited 03-03-2019 07:43 PM
ISDN Problem , I can't to send data site 2 site help me please
Router 1841 ================== Router 1841
bri0/0/0 bri0/0/0
192.168.1.1/24 192.168.1.2/24
I am verify config and debug i think it work but i can't ping from my pc to wan interface both site help me please
config
11-28-2007 05:29 PM
11-29-2007 01:46 AM
Hi Sweet ,
Can you paste sh isdn status output of both the routers.
You missed the command "encapsulation ppp" under bri 0 of IOB_Sampang router.
Add the above command and check the issue.
If you are facing the same problem then modify config of both the router as mentioned below.
IOB_Sampang router :
username IOB_Sukumvit password 0 cisco
interface BRI0/0/0
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Dialer0
description Dialout Link 128K To Sukumvit
ip address 192.168.1.1 255.255.255.0
encapsulation ppp
dialer pool 1
dialer string 023026221
dialer-group 1
ppp authentication chap
ppp chap host-name IOB_Sampang
ppp multilink
!
IOB_Sukumvit Router :
username IOB_Sampang password 0 cisco
!nterface BRI0/0/0
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn point-to-point-setup
Int dialer 0
ip address 192.168.1.2 255.255.255.0
encapsulation ppp
dialer pool 1
dialer caller XXXX (isdn no of other router)
dialer-group 1
ppp authentication chap
ppp chap host-name IOB_Sukumvit
ppp multilink
!
dialer-list 1 protocol ip permit.
All the best :)
Satish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: