Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN problems

Hi,

I cannot established a backup call between a 7200 and a 1721 because the connection is UP only for 20 seconds and then it's disconnected!!

The log on 7200 say:

*Oct 27 00:10:23.980: %DIALER-6-UNBIND: Interface Se2/0:0 unbound from profile Di1

*Oct 27 00:10:24.404: %DIALER-6-BIND: Interface Se2/0:4 bound to profile Di1

*Oct 27 00:10:24.408: %LINK-3-UPDOWN: Interface Serial2/0:4, changed state to up

*Oct 27 00:10:24.408: %ISDN-6-CONNECT: Interface Serial2/0:4 is now connected to 123456 N/A

*Oct 27 00:10:44.944: %ISDN-6-DISCONNECT: Interface Serial2/0:4 disconnected from 123456, call lasted 20 seconds

*Oct 27 00:10:44.944: %LINK-3-UPDOWN: Interface Serial2/0:4, changed state to down

*Oct 27 00:10:44.948: %DIALER-6-UNBIND: Interface Se2/0:4 unbound from profile Di1

*Oct 27 00:10:45.340: %DIALER-6-BIND: Interface Se2/0:8 bound to profile Di1

*Oct 27 00:10:45.340: %LINK-3-UPDOWN: Interface Serial2/0:8, changed state to up

*Oct 27 00:10:45.340: %ISDN-6-CONNECT: Interface Serial2/0:8 is now connected to 123456 N/A

*Oct 27 00:11:05.848: %ISDN-6-DISCONNECT: Interface Serial2/0:8 disconnected from 123456, call lasted 20 seconds

*Oct 27 00:11:05.848: %LINK-3-UPDOWN: Interface Serial2/0:8, changed state to down

*Oct 27 00:11:05.848: %DIALER-6-UNBIND: Interface Se2/0:8 unbound from profile Di1

*Oct 27 00:11:06.248: %DIALER-6-BIND: Interface Se2/0:12 bound to profile Di1

*Oct 27 00:11:06.252: %LINK-3-UPDOWN: Interface Serial2/0:12, changed state to up

*Oct 27 00:11:06.252: %ISDN-6-CONNECT: Interface Serial2/0:12 is now connected to 123456 N/A

*Oct 27 00:11:26.772: %ISDN-6-DISCONNECT: Interface Serial2/0:12 disconnected from 123456, call lasted 20 seconds

*Oct 27 00:11:26.772: %LINK-3-UPDOWN: Interface Serial2/0:12, changed state to down

*Oct 27 00:11:26.772: %DIALER-6-UNBIND: Interface Se2/0:12 unbound from profile Di1

*Oct 27 00:11:27.168: %DIALER-6-BIND: Interface Se2/0:16 bound to profile Di1

*Oct 27 00:11:27.168: %LINK-3-UPDOWN: Interface Serial2/0:16, changed state to up

*Oct 27 00:11:27.168: %ISDN-6-CONNECT: Interface Serial2/0:16 is now connected to 123456 N/A

*Oct 27 00:11:47.664: %ISDN-6-DISCONNECT: Interface Serial2/0:16 disconnected from 123456 , call lasted 20 seconds

*Oct 27 00:11:47.664: %LINK-3-UPDOWN: Interface Serial2/0:16, changed state to down

*Oct 27 00:11:47.664: %DIALER-6-UNBIND: Interface Se2/0:16 unbound from profile Di1

*Oct 27 00:11:48.068: %DIALER-6-BIND: Interface Se2/0:20 bound to profile Di1

*Oct 27 00:11:48.068: %LINK-3-UPDOWN: Interface Serial2/0:20, changed state to up

*Oct 27 00:11:48.068: %ISDN-6-CONNECT: Interface Serial2/0:20 is now connected to 123456 N/A

*Oct 27 00:12:08.560: %ISDN-6-DISCONNECT: Interface Serial2/0:20 disconnected from 123456, call lasted 20 seconds

*Oct 27 00:12:08.560: %LINK-3-UPDOWN: Interface Serial2/0:20, changed state to down

*Oct 27 00:12:08.564: %DIALER-6-UNBIND: Interface Se2/0:20 unbound from profile Di1

*Oct 27 00:12:08.964: %DIALER-6-BIND: Interface Se2/0:24 bound to profile Di1

*Oct 27 00:12:08.968: %LINK-3-UPDOWN: Interface Serial2/0:24, changed state to up

*Oct 27 00:12:08.968: %ISDN-6-CONNECT: Interface Serial2/0:24 is now connected to 123456 N/A

*Oct 27 00:12:29.436: %ISDN-6-DISCONNECT: Interface Serial2/0:24 disconnected from 123456, call lasted 20 seconds

*Oct 27 00:12:29.436: %LINK-3-UPDOWN: Interface Serial2/0:24, changed state to down

*Oct 27 00:12:29.436: %DIALER-6-UNBIND: Interface Se2/0:24 unbound from profile Di1

*Oct 27 00:12:29.848: %DIALER-6-BIND: Interface Se2/0:28 bound to profile Di1

*Oct 27 00:12:29.848: %LINK-3-UPDOWN: Interface Serial2/0:28, changed state to up

*Oct 27 00:12:29.848: %ISDN-6-CONNECT: Interface Serial2/0:28 is now connected to 123456 N/A

2 REPLIES

Re: ISDN problems

Hi,

Can u post the config?

The tel no:123456 is masked by u?

Regards,

JD

New Member

Re: ISDN problems

Hi,

It's all resolved! I had upgrade IOS on 7200 then I reboot the 1721 and now all is ok

PS. 123456 it's a masked number

Bye bye and thanks the same!!

132
Views
0
Helpful
2
Replies