I have a 3640 router that is effectively configured on our network as ISDN dial up for backup in case our Frame Relay network fails.
My manager brought me a phone bill from our provider earlier. Last month we found that on some days, this router is dialing out some of the ISDN connections
over and over again, many times within the same minute. This is causing issues as the phone company is billing us for each call
I need some help in understanding why this router is behaving in this unorthodox capacity. I have been running "debug isdn events" this afternoon, but this afternoon, the router has not been dialing out any..
Thanks for working with us on this issue. This configuration has worked most of the time. We did start having issues several months back with the repetitive dialing against only some of the dialer strings. On the most recent bill from the provider, there are 3 numbers that are being dialed over and over again on certain dates.
I am going to follow your recommendations from your last post and try to collect that data.
I have also pulled the formerly published config, as the gentleman later in the chain was correct in that I should not have published the configuration with the dialer strings exposed.
I can re-send this to you if you send me your email address.
I tought about that and it was a dumb request on my part im just so used to jusy asking for that. My email is firstname.lastname@example.org email me and let me know which 3 dial strings are showing up all the time and debug dialer will give us the exact source and dest doing the triggering,
What's proably happening is you have some rogure traffic that need to be denyed from being interesting.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.