Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISDN

Dear All,

isdn is backup at remote end

if leased line goes down.isdn want to fire automaticaly.so waht is the command for fire the ISDN automtocaly

3 REPLIES
Silver

Re: ISDN

Hi Sasi ,

At the remote end you need to configure below commands under serial so that ISDN will be fired in case of leased line goes down.

Int s0

backup delay 5 120

backup interface bri0

Thanks,

Satish

New Member

Re: ISDN

Dear sathish,

backup delay 5 means if leasedline goes down after 5min ISDN will Work..

Re: ISDN

HI SaiKumar, [Pls RATE if HELPS]

Refer Link below for a Cisco Document explaning on how to configure the Dialer Backup for the Serial Line.

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080094cb0.shtml#diag

Hope I am Informative.

Pls RATE if HELPS

Best Regards,

Guru Prasad R

108
Views
0
Helpful
3
Replies