Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

isdn2 x 4

Hi,

Is there a way or is it possible to bind 4 x isdn2 together? All terminates in the same router in both sites (A & B).

Just curius, I saw a written solution that says 512Kbps isdn2

Thanks,

Dandy

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: isdn2 x 4

Yes, with the physical interfaces controlled by single dialer interface, with the thresholds configured, it will setup and teardown channels as traffic load requires.

2 REPLIES
Hall of Fame Super Gold

Re: isdn2 x 4

Yes, with the physical interfaces controlled by single dialer interface, with the thresholds configured, it will setup and teardown channels as traffic load requires.

Re: isdn2 x 4

Hi Paolo,

I thought of putting the 4 bri interface into one dialer pool-member and one dialer interface for that dialer pool. My skepticism is that each isdn2 circuit has a dialer string, won't it be a problem?

I'm still digging for docs in Cisco website :)

EDIT: Ok, I understand it know.

Thanks,

Dandy

117
Views
0
Helpful
2
Replies
CreatePlease to create content