Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISP line on HWIC-1FE

can we terminate ISP line on HWIC-1FE card.

And if we use 4 ISP line on one router each line is 2mbps.for thise solution, which router is best.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: ISP line on HWIC-1FE

Hi,

Sure you can. To terminate multiple circuits you can also use the etherswitch module like hwic-4esw. The limitation is that these don't support more than one PPPoE per card.

Any modern router will do, starting from 18xx and up. Choice is often made by budget.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: ISP line on HWIC-1FE

Hi,

Sure you can. To terminate multiple circuits you can also use the etherswitch module like hwic-4esw. The limitation is that these don't support more than one PPPoE per card.

Any modern router will do, starting from 18xx and up. Choice is often made by budget.

Hope this helps, please rate post if it does!

109
Views
0
Helpful
1
Replies