Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISP with vlan id , cannot dialup

I use cisco 1921 k9 , made a pppoe setting, here the problem , my ISP come with a vlan ID :620, where should i input this vaule?
  • WAN Routing and Switching
1 REPLY
New Member

HI, Create Sub-interface

HI,

 

Create Sub-interface  with VLAN tag where the IPS modem/Device is connected  and then configure the Dialer interface with PPPOE setting.

 

Example:

Interface Gig 0/0 or 0/1

no ip address

 duplex auto

 speed auto

 

!

interface Gig0/0.620

 encapsulation dot1Q 620

 pppoe enable group global

 pppoe-client dial-pool-number 1

end

 

interface Dialer0

ip address  xxxxxxxxxxxx

 ip mtu 1492

 ip nat enable

 encapsulation ppp

 ip tcp adjust-mss 1452

 dialer pool 1

 dialer-group 1

 ppp authentication pap chap callin

 ppp chap hostname  ( Username)

 ppp chap password ( password)

 ppp pap sent-username ( Username) password 7 (Password)

end

46
Views
0
Helpful
1
Replies