TAWTAK4451-R#sh version Cisco IOS XE Software, Version 03.11.01.S - Standard Support Release Cisco IOS Software, ISR4400 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Sat 01-Mar-14 12:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software.
ROM: IOS-XE ROMMON
TAWTAK4451-R uptime is 3 weeks, 4 days, 19 hours, 58 minutes Uptime for this control processor is 3 weeks, 4 days, 19 hours, 59 minutes System returned to ROM by reload System restarted at 15:05:41 UTC Thu Jul 10 2014 System image file is "bootflash:/isr4400-universalk9.03.11.01.S.154-1.S1-std.SPA.bin" Last reload reason: Reload Command
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to email@example.com.
Technology Package License Information:
----------------------------------------------------------------- Technology Technology-package Technology-package Current Type Next reboot ------------------------------------------------------------------ appx None None None uc None None None security None None None ipbase ipbasek9 Permanent ipbasek9
cisco ISR4451-X/K9 (2RU) processor with 1385839K/6147K bytes of memory. Processor board ID FGL1813129S 10 Gigabit Ethernet interfaces 32768K bytes of non-volatile configuration memory. 4194304K bytes of physical memory. 7393215K bytes of flash memory at bootflash:.
Configuration register is 0x2102
I am not able to configure IP accounting. When I go the interface I cannot put the command IP accounting. Please not I have configured aaa new-model.
IP accounting is not supported in any IOS-XE router. The 4451 runs IOS-XE so the same rules from the ASR1000 apply here since this was the first platform with IOS-XE. ASR1000 doesn't support IP accounting. There are several bugs that document this: CSCtx97298 Remove unsupported CLI "show ip accounting" Externally found moderate (Sev3) bug: R-Resolved
CSCth37116 ASR1000 Disable IP accounting from the CLI Externally found moderate (Sev3) bug: R-Resolved
There are no specific documents for the 4451 because this device is very new but again, the same thing applies here. This is not supported here as well in the ASR1000s. The replacement for this feature is Flexible Netflow.
NetFlow is a Cisco IOS technology that provides statistics on packets flowing through the router. NetFlow is the standard for acquiring IP operational data from IP networks. NetFlow provides data to enable network and security monitoring, network planning, traffic analysis, and IP accounting.
A comprehensive IP accounting feature that can be used to replace many accounting features, such as IP accounting, Border Gateway Protocol (BGP) Policy Accounting, and persistent caches.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...