Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ISR G2 - support for WIC-1T and WIC-2T

I wonder if legacy WIC-1T and WIC-2T will be supported on ISR G2 (c2900 and c3900) in EHWIC slots.

I received an error message upon c2921 boot up

*Feb  2 14:08:25.107: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/0 has an
unknown id 0x2

and  "show diag" displays

Slot 0:

        C2921 Mother board 3GE, integrated VPN and 4W Port adapter, 7 ports

        Port adapter is analyzed

        Port adapter insertion time 00:02:58 ago

        EEPROM contents at hardware discovery:

        PCB Serial Number        : FOC14010GAD

        Hardware Revision        : 1.0

        Part Number              : 73-11835-03

        Top Assy. Part Number    : 800-30794-01

        Board Revision           : B0

        Deviation Number         : 0

        Fab Version              : 03

        Product (FRU) Number     : CISCO2921/K9

        Version Identifier       : V01

        CLEI Code                : COMGL00ARA

        Processor type           : C2

        Chassis Serial Number    : FCZ140371P4

        Chassis MAC Address      : 8843.e148.9a50

        MAC Address block size   : 80

        Manufacturing Test Data  : 00 00 00 00 00 00 00 00

        EEPROM format version 4

        WIC Slot 0:

        Serial 1T WAN daughter card

        WIC module not supported/disabled in this slot

        Hardware revision 1.1           Board revision E0

        Serial number     10536228      Part number    73-1775-02

        FRU Part Number     WIC-1T=

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 1

        EEPROM contents (hex):

          0x20: 01 02 01 01 00 A0 C5 24 49 06 EF 02 00 00 00 00

          0x30: 70 00 00 00 98 10 22 01 FF FF FF FF FF FF FF FF

Everyone's tags (5)
1 REPLY

Re: ISR G2 - support for WIC-1T and WIC-2T

It looks like it is not supported. Here's a link to the support cards. The WIC-1T and 2T are not listed. You can upgrade to the HWIC-1T and 2T though.

http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html#serialwan

Hope that helps.

10961
Views
0
Helpful
1
Replies