I have a Cisco 3640 with a hssi card connected to a adtran T3SU 300. The hssi card is receving lots of input erros and CRC errors. The DSU is receving errors aswell on the local side.
My telco tests clean to a loop i Put infrom of the DSU and behind the DSU. So it seems to be an issue with the DSU talking with the HSSI card. I have found serveral threads on the net about this issue but no resloution. Any thoughts?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...