12-19-2006 02:40 PM - edited 03-03-2019 03:06 PM
hi I have a few routers in a lab and have async connections to their con 0 port for a 3745 with an 8 port async card.
the config in the lines and con 0's is as documented on CCO.
When i am telnetted thru the 3745 onto the con 0's I keep getting spurious text displayed eg see below sho ip ospf nei
Neighbor ID Pri State ighbor ITime Pri s Interface
1.1.1.1 1 FULL/DR 00:01:44 10.10.1.1 Serial0/1
Lab_Router3_Real4#sho ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 1 FULnterface 00:01:43 10.10.1.1 Serial0/1
Lab_Router3_Real4#
this is happening on all lines
any ideas
12-19-2006 03:33 PM
Try configuring "no exec" under the async tty ports on the 3745 as follow. It should fix the issue.
line x y
no exec
Hope this helps,
12-19-2006 04:19 PM
Hi
i have already tied that see below
line 65 95
exec-timeout 0 0
no exec
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide