Does anyone know of any issues with SXJ and source specific multicast? We upgraded our core from SXI6 to SXJ2 and multicast stopped working for all but our L3 links.
Our L2/L3 links stopped working and the only thing that has changed is the IOS version. All the configurations are still valid etc. Currently have a call open with TAC, but wanted to see if anyone else had seen this.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...