Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Jitter in 3750/2960

We are using 3750 & 2960 switches in our network. The network is in star configuration with 3750 at the center and 2960 as the spokes. Each 2960 is in different VLAN & the internal network (hosts) of 3750 is in separate VLAN. EIGRP routing is implemented.

The data rates are about 1Mbps. However we have stringent jitter requirements, which is about 6 micro seconds. I would like to know about the jitter introduced by the 3750 & 2960 switches (disregarding the link jitter) on the packets. How QoS will help

Thank You

Everyone's tags (4)
3 REPLIES
Hall of Fame Super Silver

Re: Jitter in 3750/2960

Hello Praneth,

>> How QoS will help

you should implement a priority queue to give better treatment to selected traffic flows (not to all traffic)

>> However we have stringent jitter requirements, which is about 6 micro seconds

stringent requirement indeed

Hope to help

Giuseppe

Community Member

Re: Jitter in 3750/2960

Thank You for the reply.

Is there anyway I can get the exact(average) value of the Jitter.

Thanks

1032
Views
4
Helpful
3
Replies
CreatePlease to create content